Stacked Merry Tree Spangle Transfer

This is a heat applied patch. You need a heat press to apply.

Size: Approx. 11 inches

Pre-press garment to remove moisture and smooth out any wrinkles.

Carefully peel off the transfer backing, ensuring that only the spangle design remains on the clear adhesive sheet. (If any spangles have shifted, use tweezers to reposition them before pressing)

Position the transfer adhesive side down in the desired location.

Smooth out any bubbles or wrinkles to avoid lifting during pressing.

Press the transfer at 300°F - 325°F using firm pressure.

Allow the garment to cool for 15-30 seconds to let the adhesive set.

Carefully peel the carrier sheet while it is still warm using a smooth and steady motion to prevent lifting the spangles.

TIP: To ensure better adhesion, after pressing, rub the spangles firmly into the garment using a cloth before peeling the carrier sheet.

Washing Instructions: Wait 24 hours before washing. Use cold water when washing and tumble dry on low or hang dry. Avoid using fabric softener.